HP Deskjet 450 Mobile Printer series - Manual (Page 37)

ENWW 4-8
For Windows
1 Open the printer driver.
2 Under Print Quality , click Best .
3 Under Paper Type , select Transparency Films .
Select the type of transparency film you are using. For example, if you are
printing on HP Premium Plus Inkjet Transparency film, select this option
from the menu.
4 Under Paper Size , select the appropriate size for the transparency you are
printing.
5 Change any other print settings if necessary, then click OK to print the
transparencies.
For Macintosh
1 Select the paper size, then click OK .
2 Open the Paper Type/Quality panel.
3 Select the paper type you are using. For example, if you are printing on
HP Premium Plus Inkjet Transparency film, select this from the menu.
4 Click the Quality tab and select Best .
5 Change any other print settings if necessary, then click OK to print the
transparencies.
Use Best mode to print transparencies. This mode provides a longer drying
time and ensures that the ink dries completely before the next page exits the
printer.
Remove each sheet of media as it prints and set aside to dry. Allowing wet
media to stack up may cause smearing.
Use Best mode to print transparencies. This mode provides a longer drying
time and ensures that the ink dries completely before the next page exits the
printer.
Remove each sheet of media as it prints and set aside to dry. Allowing wet
media to stack up may cause smearing.