HP Deskjet 450 Mobile Printer series - Manual (Page 12)

1-8 ENWW
6 Close the front access cover. Wait for the carriage to complete the print
cartridge initialization routine and return to the home position at the right
side of the printer before using the printer.
Step 6: Install the software
Install the printer software from the Starter CD before you connect the parallel
or USB cable. For details, see
Installing Software .
Step 7: Connect the printer cable (if required)
For Windows
If your computer has a USB port and is using Microsoft ® Windows ® 98,
Windows Me, Windows 2000, or Windows XP, you can connect the printer to
the computer using a USB cable.
If your computer is using Windows NT ® version 4.0 or if your computer is not
configured to use USB, you can connect the printer to your computer with the
parallel cable that is provided with the printer.
For infrared connection, please see Infrared printing .
For Macintosh
If your computer has a USB port, you can connect the printer to the computer
using a USB cable.
Step 8: Load paper
1 Slide up the input tray extension.
2 Load media into the input tray. The input tray supports up to 45 sheets of
plain paper or a stack of media no more than 0.18 in (4.5 mm) thick.
3 Slide the paper guide snugly against the edge of the media.
Do not open the front access cover until the print cartridge initialization is
complete.
1
2
3