HP ProLiant DL385 G7 Server - Manual (Page 81)

Troubleshooting 81
• Server does not boot SmartStart
Possible causes:
• Corrupted operating system
• Hard drive subsystem problem
• Incorrect boot order setting in RBSU
Item Refer to
1 HP ROM-Based Setup Utility User Guide
( http://www.hp.com/servers/smartstart )
2 "POST problems flowchart (on page 79 )"
3 • "Hard drive problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(
http://www.hp.com/support )
• Controller documentation
4 "HP Insight Diagnostics (on page 65 )" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
website ( http://www.hp.com/support )
5 • "CD-ROM and DVD drive problems" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
HP website ( http://www.hp.com/support )
• Controller documentation
• "Loose connections (on page 72 )"
6 "General memory problems are occurring" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
website ( http://www.hp.com/support )
7 • "Operating system problems" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
HP website ( http://www.hp.com/support )
• "HP contact information (on page 97 )"
8 • "Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(
http://www.hp.com/support )
• Server maintenance and service guide, located on the
Documentation CD or the HP website
(
http://www.hp.com/products/servers/platforms )
9 "General diagnosis flowchart (on page 74 )"