HP ProLiant DL385 G7 Server - Manual (Page 46)

Hardware options installation 46
CAUTION: Any attempt to remove an installed TPM from the system board breaks or
disfigures the TPM security rivet. Upon locating a broken or disfigured rivet on an installed
TPM, administrators should consider the system compromised and take appropriate measures
to ensure the integrity of the system data.
8. Install the TPM board. Press down on the connector to seat the board.
9. Install the TPM security rivet by pressing the rivet firmly into the system board.
10.
11. Install the air baffle.
12. Install the PCI riser cage (on page 26 ).
13. Install the full-length expansion board retainer (on page 26 ) if any full-length expansion boards are
installed.
14. Install the access panel (on page 24 ).
15. Install the server into the rack (" Installing the server into the rack " on page 35 ).
16. Power up the server (on page 22 , " Powering up and configuring the server " on page 37 ).