HP ProLiant DL385 G7 Server - Manual (Page 44)

Hardware options installation 44
18. Remove the fan blanks in bays 5 and 6.
19. Install the fans into bays 5 and 6.
20. If any full-length expansion boards are installed, complete the following steps:
a. Install the PCI riser cage (on page 26 ).
b. Install the full-length expansion board retainer (on page 26 ).
21. Install the access panel (on page 24 ).
22. Install the server into the rack (" Installing the server into the rack " on page 35 ).
23. Power up the server (on page 22 , " Powering up and configuring the server " on page 37 ).
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1. Installing the Trusted Platform Module board (on page 45 ).