9 troubleshooting the policy advisor, Troubleshooting the policy advisor – HP 3PAR Policy Manager Software User Manual
Page 37
4.21
Troubleshooting the Policy Advisor
3PAR Policy Advisor User’s Guide
If a virtual volume cannot be tuned, the reason is displayed. The virtual volumes matching the
analysis criteria are displayed:
-----------------------------------------
Non-cpg based VVs meeting tuning criteria
-----------------------------------------
Analyzing possible tune commands
A total of 1 Virtual Volumes (VVs) will be analyzed
Name -----------Criteria---------- -SkipReason- -----------TuneCmd---------
aldvv1 {Volume RAID=r1 required=r5} {Volume ssz=2 required=4} {PD usage=16/32 (50%/threshold 90%) of FC:10}
tunealdvv -t r5 -ssz 4 -ha mag -p -devtype FC -f aldvv1
The analysis is summarized. The suggested CLI commands you should run are displayed:
---------------------------
Suggested tune command list
---------------------------
tunealdvv -t r5 -ssz 4 -ha mag -p -devtype FC -f aldvv1
Total of 1 tune command to run
For a complete list of options available for the
tunevv
or
tunealdvv
command, see the
InForm OS Command Line Interface Reference and InForm CLI Help.
4.9 Troubleshooting the Policy Advisor
■
If a large number of tuning operations are suggested, it might be beneficial to run some of
the tuning operations, let them complete, and then re-run Policy Advisor. It is possible that
changes to the system configuration made by earlier tuning operations might affect the
later tuning operations.
■
If suggested tuning operations start to fail, stop the Policy Advisor script and then re-run it.
Most likely, something on the system has changed since the script started. Stop and re-run
the script to see if new tuning operations are suggested with the current configuration.
■
The script always starts with the smallest virtual volumes first to attempt to free space on
more heavily used physical disks. This gives tuning operations on larger virtual volumes a
better chance of improving the layout. If there is very little space on the system, space
needs to be freed up before Policy Advisor will be effective.