HP Insight Management WBEM Providers - Manual (Page 17)

Using the SMH with the Insight Providers 17
Thresholds are now set. The value of these thresholds is persistent and is not lost during a reboot. If the
Insight Providers are upgraded, these threshold values are preserved.
If utilization surpasses a threshold, an indication is generated. For an indication to be received, a
subscription must exist for one of the following indication classes:
• HP_CpuThresholdIndication (to get only the CPU indications)
• HP_DiskThresholdIndication (to get only the Disk indications)
• HP_ThresholdIndication
• CIM_ThresholdIndication
• CIM_AlertIndication
• CIM_ProcessIndication
• CIM_Indication
If the server is being managed by HP SIM, the threshold values can be captured and pushed to other HP
SIM-managed servers through the replicate agent settings functionality.
Data collection
The SMH enables data collected from the Insight Providers or SNMP agents. After the Insight Providers
are installed, SMH defaults to WBEM.
To change this setting:
1. Log into the SMH, and click Settings > Select SMH Data Source > Select.
2. Click the WBEM or SNMP radio button.
3. Click Select.