Detailed report information – HP Integrity NonStop H-Series User Manual
Page 47
Managing Open SCSI Devices
Example of a STATUS SCSI Detailed Report
Detailed Report Information
These subsections describe the fields in the STATUS SCSI detailed report.
SCSI Path Information
This Open SCSI device path information is provided in the detailed report produced by
the STATUS SCSI, DETAIL command:
SCSI-Specific Information
This SCSI-specific information is provided in the detailed report produced by the
STATUS SCSI, DETAIL command:
LDev
shows the logical device number for the Open SCSI device. This
number is arbitrarily assigned to a device when the device is
configured and every time the system is loaded.
Path
shows the Open SCSI device path assignments.
Status
shows whether this Open SCSI device path is the current path
(ACTIVE) or not (INACTIVE).
State
shows the current SCF object state of this Open SCSI device
path. (See
Primary PID
shows the processor number and PIN of the current primary
Open SCSI I/O process.
Backup PID
shows the processor number and PIN of the current backup
Open SCSI I/O process.
Pending I/Os
shows the current number of pending I/O requests
against the Open SCSI process.
High Pending I/Os
shows the highest number of pending I/O requests that
have been outstanding against the Open SCSI device at
one time since the Open SCSI IOP was started.
Opens
shows the current number of requesters that have the
Open SCSI I/O process open.
Max Open
shows the maximum number of open requests allowed
at one time by the Open SCSI IOP.
Open Paths
shows the number of paths currently opened by the
Open SCSI IOP.
Max I/O Requests
shows the maximum number of open requests allowed
by the Open SCSI IOP.