Suspend syncfileset, Suspend syncuser, Synchronize – HP NonStop G-Series User Manual
Page 185: 35 and, Use the, Command to suspend all autosync users, Command, plus options, Command, Command option, And specify the ho
Command Interpreter
HP AutoSYNC User’s Guide—522580-016
8-93
SUSPEND SYNCFILESET
SUSPEND SYNCFILESET
Stops the synchronization for a given file set. The synchronization operations can be
resumed by using the ACTIVATE SYNCFILESET command. Active synchronization is
stopped after the current file set is synchronized.
* | fset-id | fset-id - fset-id
identifies a synchronization file-set ID or a range of file-set IDs. Up to 32 ranges
can be entered.
If fset-id - fset-id is specified, the second fset-id must be greater than the
first.
* designates all configured syncfilesets for the syncuser.
To display the file set ID’s and BATCHIDs, use
.
SUSPEND SYNCUSER
Stops synchronization activity for the specified user. Active synchronization is stopped
after the current file set is synchronized.
user-id
a Guardian user ID or user name of a configured user.
ALLUSERS
designates all users.
SYNCHRONIZE
Executes a one time synchronization. Each eligible file in the source file set is copied
to the destination file set unless the same file (or a later version) is already present.
The following source files are not eligible for synchronization:
•
Audited files, unless AUDITED is specified
•
Partitioned files
•
Corrupt or broken files
•
Files opened exclusively
•
Files opened for update, unless OPENUPDATE is specified
SUSPEND SYNCF[ILESET] fset-range [, fset-range ] ,...;
fset-range is { * | fset-id | fset-id - fset-id }
SUSPEND SYNCU[SER] { user-id | ALLUSERS };