Updating – HP Plug-in for SAP NetWeaver Landscape Virtualization Management for Storage User Manual
Page 10
After upgrade, HP Storage Plug-in requires that you validate and accept the HP 3PAR StoreServ
Storage SSL certificate to perform any operations related to HP 3PAR StoreServ. If you do not
accept the certificate, connection to HP 3PAR StoreServ is denied.
Configuring arrays using Storage Administrator portal
You can configure HP 3PAR StoreServ and HP XP arrays using the Storage Administrator portal.
NOTE:
The Storage Administrator portal is supported only on Internet Explorer.
To configure arrays, do the following:
1.
Launch the Storage Administrator portal by navigating to http://
. For example:
http://localhost:3500/ui_mgmtjsp.
2.
Login using the following credentials:
•
Username—admin
•
Password—the password used during installation of the HP Storage Provider
3.
Click Add.
4.
Select the Storage Array from the Type list, and click Next.
5.
Enter the hostname or IP address of the array, and enter the credentials.
The HP 3PAR StoreServ Storage SSL certificate is displayed.
6.
Accept the certificate. Click Next to configure and use HP 3PAR StoreServ.
7.
Click Next to view the details of the array.
8.
Click Finish to view the array listed in the home page of the portal.
Updating HP 3PAR StoreServ Storage SSL certificates
If you have upgraded to the current version, then all the arrays configured in the previous version
are displayed in the Storage Administrator Portal. However, the required SSL certificates are not
available in the database for HP 3PAR StoreServs. To obtain an HP 3PAR StoreServ SSL certificate,
do the following:
1.
Open the Storage Administrator Portal.
2.
Select the required HP 3PAR StoreServ and click Modify.
3.
Enter the HP 3PAR StoreServ credentials, when prompted.
The HP 3PAR StoreServ Storage SSL certificate is displayed.
4.
Accept the certificate. Click Next to configure and use HP 3PAR StoreServ.
The certificate details for HP 3PAR StoreServ are updated in the database. System Model and
System Firmware details of the array are also displayed.
10
Installing HP Storage plug-in