HP Color LaserJet Pro MFP M476 series User Manual
Page 95
Method two: Update the firmware using the Firmware Update Utility
Use these steps to manually download and install the Firmware Update Utility from HP.com.
NOTE:
This method is the only firmware update option available for products connected to the computer
via a USB cable. It also works for products connected to a network.
1.
Go to
lick the Drivers & Software link, type the product name in the search
field, press the
ENTER
button, and then select the product from the list of search results.
2.
Select the operating system.
3.
Under the Firmware section, locate the Firmware Update Utility.
4.
Click Download, click Run, and then click Run again.
5.
When the utility launches, select the product from the drop-down list, and then click Send Firmware.
NOTE:
To print a configuration page to verify the installed firmware version before or after the update
process, click Print Config.
6.
Follow the on-screen instructions to complete the installation, and then click the Exit button to close
the utility.
ENWW
Update the firmware
85