HP Color LaserJet Pro MFP M476 series - Manual (Page 86)

Tab or section Description
Home tab
Provides product, status, and
configuration information.
● Device Status: Shows the product status and shows the approximate percent life
remaining of HP supplies.
● Supplies Status: Shows the approximate percent life remaining of HP supplies. Actual
supply life remaining can vary. Consider having a replacement supply available to install
when print quality is no longer acceptable. The supply does not need to be replaced
unless the print quality is no longer acceptable.
● Device Configuration: Shows the information found on the product configuration page.
● Network Summary: Shows the information found on the product network configuration
page.
● Reports: Print the configuration and supplies status pages that the product generates.
● Event Log: Shows a list of all product events and errors.
System tab
Provides the ability to configure the
product from your computer.
● Device Information: Provides basic product and company information.
● Paper Setup: Change the default paper-handling settings for the product.
● Print Quality: Change the default print-quality settings for the product.
● EcoSMART Console: Change the default times for entering Sleep mode or Auto Power
Down mode. Configure which events cause the product to wake.
● Paper Types: Configure print modes that correspond to the paper types that the product
accepts.
● System Setup: Change the system defaults for the product.
● Service: Perform the cleaning procedure on the product.
● Save and Restore: Save the current settings for the product to a file on the computer.
Use this file to load the same settings onto another product or to restore these settings
to this product at a later time.
● Administration: Set or change the product password. Enable or disable product features.
NOTE: The System tab can be password-protected. If this product is on a network, always
consult with the administrator before changing settings on this tab.
Print tab
Provides the ability to change
default print settings from your
computer.
● Printing: Change the default product print settings, such as number of copies and paper
orientation. These are the same options that are available on the control panel.
● PCL5c: View and change the PCL5c settings.
● PostScript: Turn off or on the Print PS Errors feature.
Fax tab
(Fax products only)
● Receive Options: Configure how the product handles incoming faxes.
● Phone Book: Add or delete entries in the fax phone book.
● Junk Fax List: Set fax numbers to block from sending faxes to the product.
● Fax Activity Log: Review recent fax activity for the product.
76 Chapter 8 Manage the product ENWW