HP Insight Control Software for Linux - Manual (Page 55)

Suggested action
Try the following:
•
Ensure that the virtual machine that you have manually created has a legacy network adapter.
•
Ensure that the legacy network adapter on the virtual machine is connected to the correct
virtual network switch on the host.
•
Ensure that the Virtual network switch configuration on the Microsoft Hyper-V host is correct
and the virtual switch is connected to a physical network adapter with external network
connectivity.
Kernel panic occurs in booting a virtual machine to the Insight Control server migration
Virtual Machine Boot CD ISO
Insight Control server migration requires that the destination virtual machine has at least 1024 MB
of RAM to boot to the Insight Control server migration Virtual Machine Boot CD ISO.
Suggested action
Try the following:
1. Power down the virtual machine.
2. Ensure that the virtual machine has at least 1024 MB of RAM.
3. Reboot to the Insight Control server migration Virtual Machine Boot CD ISO.
Mouse does not work on a virtual machine booted with the Insight Control server
migration Virtual Machine Boot CD ISO
Cause
This issue occurs because virtual machine tools required for the mouse on certain virtualization
layers are not available on the Insight Control server migration Virtual Machine Boot CD ISO.
Suggested action
Use the Tab and Enter/Return keys on the keyboard to navigate the user interface on the Insight
Control server migration Virtual Machine Boot CD ISO.
Primary array controller does not have logical drives defined
Suggested action
Confirm that your array controller has at least one logical drive defined.
You can confirm this by accessing the Configure Destination Server screen and then clicking Array
Configuration Utility or HP Smart Storage Administrator (HP SSA) or by rebooting to Option ROM
Configuration for many controllers (ORCA).
Primary controller configured in the system does not have drives attached
Suggested action
Confirm that your hardware setup is correct and that the correct controller is set to primary in
ROM-Based Setup Utility (RBSU).
Primary controller in the system is not supported by this version of Insight Control
server migration
When the destination server is manually booted using the Boot CD ISO, the error message The
primary controller in your system is not supported by this version of
Destination preparation 55