beautypg.com

Rebalancevip – HP StoreVirtual VSA Software User Manual

Page 66

background image

66 | HP P4000 CLI | Commands

userName Required The authentication user name for the storage system

passWord Required The password for the storage system

keyFile Required The encrypted key file (this is specified instead of the username and password

parameters)

clusterName Required The name of the cluster

volumeName Required The name of the volume

size Required The size of the volume, with units specified: MB - n Megabytes (1024 Kilobytes),

GB - n Gigabytes (1024 Megabytes), TB - n Terabytes (1024 Gigabytes)

description Optional Optional description

replication Optional The replication level for the volume (1|2|3|4)

minReplication Optional The minimum replication allowed for the volume before it goes offline (1|2|3|4).

Note: the minReplication value must be equal to or less than the replication value on the

volume.

parity Optional The number of parity storage systems for the data on this volume. This enables parity

network RAID on the volume. Replication and parity are supported in the following

combinations: replication:1, parity:0 Network RAID-0 (None), replication:2, parity:0

Network RAID-10 (2-way Mirror), replication:3, parity:0 Network RAID-10+1 (3-way

Mirror), replication:4, parity:0 Network RAID-10+2 (4-way Mirror), replication:2,

parity:1 Network RAID-5 (Single parity), replication:3, parity:2 Network RAID-6 (Dual

Parity)

checkSum Optional 0 - the volume does not use checksums1 - the volume uses checksums

thinProvision Optional 0 - the volume does not use thin-provisioning1 - The volume is thin-provisioned (in a

thinly provisioned volume, reserve may be < length)

initialQuota Optional The initial quota for the volume, as a percentage or size - the volume resets to this initial

size when a snapshot is taken

reserveQuota Optional The reserve quota for the volume, as a percentage or size - this is the size guaranteed to

be available for this volume, regardless of space allocated to other objects in the system

scratchQuota Optional The scratch quota for the volume, as a percentage or size - this is the size guaranteed to

be available for snapshots of this volume, regardless of space allocated to other objects

in the system

mountPoint Optional The drive letter or mount point on the host for the volume (LUN will be uninitialized if not

specified)

stridePages Optional This is the initial stride setting for the volume - this must be a power of 2 (1,2,4,8)

namePrefix Optional A prefix string for newly created objects. A unique number value will be concatenated

to this prefix to guarantee name uniqueness.

vipLoadBalance Optional Use VIP load balancing for this host. This can be one of: 0, 1 - default

Example

cliq provisionVolume clusterName=TheCluster volumeName=TheVolume
description=NewVolume size=100GB mountPoint=z: login=10.0.1.2
userName=admin passWord=secret

rebalanceVip

This command rebalances the connections to a volume when using a virtual IP address.

Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax

cliq rebalanceVip volumeName= login= userName= passWord=

login Required The IP address or DNS-resolvable names of one or more storage systems

userName Required The authentication user name for the storage system

This manual is related to the following products: