HP StoreVirtual VSA Software - Manual (Page 33)

HP P4000 CLI | Commands | 33
alertOnWarning Optional 0 - the log does not includes warning events (default), 1 - the log includes warning
events
alertOnCritical Optional 0 - the log does not includes critical events (default), 1 - the log includes critical events
Example
cliq createSyslogNotifyPolicy login=10.0.1.3 userName=admin
passWord=secret ipAddress="10.0.10.25" alertOnCritical="1"
cliq createSyslogNotifyPolicy ipAddress="10.0.10.25"
alertOnCritical="1"
createVolume
This command creates a SAN volume without connecting to a host.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq
createVolume volumeName= clusterName= size= description= login= username= password=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
volumeName Required The name of the volume
clusterName Required The name of the cluster
size Required The size of the volume, with units specified: MB - n Megabytes (1024 Kilobytes),
GB - n Gigabytes (1024 Megabytes), TB - n Terabytes (1024 Gigabytes)
description Optional Optional description
replication Optional The replication level for the volume (1|2|3|4)
minReplication Optional The minimum replication allowed for the volume before it goes offline (1|2|3|4).
Note: the minReplication value must be equal to or less than the replication value on the
volume.
parity Optional The number of parity storage systems for the data on this volume. This enables parity
network RAID on the volume. Replication and parity are supported in the following
combinations: replication:1, parity:0 Network RAID-0 (None), replication:2, parity:0
Network RAID-10 (2-way Mirror), replication:3, parity:0 Network RAID-10+1 (3-way
Mirror), replication:4, parity:0 Network RAID-10+2 (4-way Mirror), replication:2,
parity:1 Network RAID-5 (Single parity), replication:3, parity:2 Network RAID-6 (Dual
Parity)
checkSum Optional 0 - the volume does not use checksums1 - the volume uses checksums
thinProvision Optional 0 - the volume does not use thin-provisioning1 - The volume is thin-provisioned (in a
thinly provisioned volume, reserve may be < length)
initialQuota Optional The initial quota for the volume, as a percentage or size - the volume resets to this initial
size when a snapshot is taken
reserveQuota Optional The reserve quota for the volume, as a percentage or size - this is the size guaranteed to
be available for this volume, regardless of space allocated to other objects in the system
scratchQuota Optional The scratch quota for the volume, as a percentage or size - this is the size guaranteed to
be available for snapshots of this volume, regardless of space allocated to other objects
in the system
stridePages Optional This is the initial stride setting for the volume - this must be a power of 2 (1,2,4,8)