Createsite, Createsnapshot – HP StoreVirtual VSA Software User Manual
Page 29
HP P4000 CLI | Commands | 29
chapName Optional The CHAP name for the volume. If this is not specified, the IQN of the local server is
used (this parameter is required if run on a storage system).
targetSecret Optional The CHAP target secret for the volume.
initiatorSecret Optional The CHAP initiator secret for the volume.
Example
cliq createServer serverName=TheServer useChap=0
initiator=iqn.1991-05.com.microsoft:w-
gregorio.corp.lefthandnetworks.com login=10.0.1.2 userName=admin
passWord=secret
cliq createServer serverName=TheServer useChap=0
initiator=iqn.1991-05.com.microsoft:w-
gregorio.corp.lefthandnetworks.com
createSite
This command creates a site in a multi-site SAN.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq createSite siteName= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
siteName Required The name of the site
description Optional Optional description
primary Optional This site is the primary site. This can be one of: 0, 1 - default
Example
cliq createSite siteName=Headquarters login=10.0.1.2 userName=admin
passWord=secret
cliq createSite siteName=Headquarters
createSnapshot
This command creates a snapshot of one or more SAN/iQ volumes.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq createSnapshot volumeName= snapshotName= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system