Modifyremotesnapshotschedule, Modifyserver – HP StoreVirtual VSA Software User Manual
Page 60
60 | HP P4000 CLI | Commands
modifyRemoteSnapshotSchedule
This command modifies a previously created remote snapshot schedule.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq
modifyRemoteSnapshotSchedule scheduleName= login= userName= passWord= remoteretentioncount=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
scheduleName Required The name of the schedule
remoteretentioncount Optional The number of remote snapshots to maintain. Must be between 1 and 50. Either
remoteretentioncount or remoteretentionseconds must be specified.
remoteretentionseconds Optional How long remote snapshots should be retained. Either remoteretentioncount or
remoteretentionseconds must be specified.
Example
cliq modifyRemoteSnapshotSchedule scheduleName="TheSchedule"
login="10.0.1.2" userName="admin" passWord="secret"
remoteretentioncount="10"
cliq modifyRemoteSnapshotSchedule scheduleName="TheSchedule"
remoteretentioncount="10"
modifyServer
This command modifies a server.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq modifyServer serverName= useChap= initiator= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
serverName Required The name of the server
description Optional Optional description
allowiSCSIAccess Optional Allow iSCSI access for this host. This can be one of 0, 1 - default
vipLoadBalance Optional Use VIP load balancing for this host. This can be one of: 0, 1 - default
useCHAP Optional Use CHAP Authentication this host. This can be one of: 0, 1
initiator Optional A semicolon delimited string of host IQN's. If this is not specified, the IQN of the local
server is used (this parameter is required if run on a storage system).