HP StorageWorks Auto Path VA Software - Manual (Page 47)

Operation 47
Chart parameters
Paths Drop-down box that is used to select the index number
of a path to be charted.
Counter A list of available counters, measured on the y-axis of
each chart. Choices are:
% Disk Read Time
% Disk Write Time
% Disk Time
% Idle Time
Disk Read/sec
Disk Writes/sec
Disk Transfers/sec
Current Disk Queue Length
Disk Bytes/Sec
Disk Read Bytes/Sec
Disk Write Bytes/Sec
Scale Drop-down box that is used to select the scale of the
chart.
Set Starts the plotting of the chart as per the selected
parameters.
Chart settings information
Path # The previously determined index number of the plotted
path, followed by its SCSI address:
[Port.Path.Target.LUN].
Multiple plots, using different counters, can be
generated for the same path.
Counter The selected counter for the plot.
Scale The selected scale for the plot.
Color The color of the plot.