HP StorageWorks Auto Path VA Software - Manual (Page 44)

44 HP Auto Path XP: User’s Guide (Windows NT/2000)
Setting the preferred path
The Device Settings window lets you set the preferred path when you have
no load balancing policy for a selected device.
If the current policy is not No Load Balancing, set the Load Balance Policy
to No Load Balancing for the device for which you want to set a preferred
path.
To set the preferred path:
1. From the tree view, select the server, disk array, and device that you
want to set the preferred path for.
The Device Settings window opens (see page 40).
2. Select the Preferred Path from the Preferred Path Number drop-down
menu.
The new Preferred Path is displayed. If the selected Preferred Path is
different from the Current Preferred Path, the OK button is enabled.
Example