HP StorageWorks Auto Path VA Software - Manual (Page 41)

Operation 41
Path # The index number for the path.
State The state of the path:
Active The path to the device is available for
I/O.
Failed The path to the device is not available
for I/O.
Controller Port # The port number of the controller on the disk array to
which the device is connected.
Port.Bus.Target.LUN
Displays the physical path identifier.
Set Applies the changes.
Cancel Cancels the operation.
Path Performance Allows you to create and view performance graphs of
the paths to the device; see “Path Performance
window” (page 46).