HP StorageWorks Auto Path VA Software - Manual (Page 39)

Operation 39
Adding new devices and paths
Windows NT
When you add a new device or a new path to an existing device, you must
run Windows Disk Administrator so that Auto Path can recognize it.
To recognize new devices or paths in Auto Path:
1. Start Windows Disk Administrator by selecting
Programs
→ Administrative Tools → Disk Administrator from the
Windows Start menu.
2. After Disk Administrator is fully initialized and execution is finished,
you must refresh the Auto Path GUI. Return to the Devices window and
select Refresh from the View menu.
The new device or path is displayed in the Devices window.
3. Close Disk Administrator.