HP StorageWorks 1000 Modular Smart Array - Manual (Page 23)

HP StorageWorks 1000/1500 Modular Smart Array Command Line Interface user guide 23
Example
show this_controller
command and response
CLI> show this_controller
Controller 1 (right controller):
MSA1500 c Hewlett-Packard xxx Version 6.86 Build 122 Hardware 7
Component Enclosure.
Controller Identifier:
NODE_ID=yyyyyyyy-yyyyyyyy
SCSI_VERSION=SCSI-3
Supported Redundancy Mode: Active/Standby Asm-Active/Active
Current Redundancy Mode: Asym-Active/Active
Device Port SCSI address 6
Terminal speed for the CLI is set to 19200.
Host Port_1:
REPORTED PORT_ID YYYYYYYYY-YYYYYYYYY
PORT_1_TOPOLOGY=F_Port
Cache:
128 megabytes read cache 128 megabytes write cache Version 2
Cache is GOOD, and Cache is enabled
No unflushed data in cache
Battery:
Module #1 is fully charged and turned off.
Controller Up Time:
5 Days 06 Hours 01 Minutes 51 Seconds
Health:
Surface Scan: Complete.
Rebuild Status: Complete.
Expansion: Complete.