HP 3PAR StoreServ 7000 Storage - Manual (Page 19)

4 Connect to the HP 3PAR StoreServ 7000 Storage System
1. Click the Connect to the storage system link.
2. In the IP Address or Name text box:
•
If this is the first time you are connecting to the HP 3PAR storage system, enter the name
or IP address of the HP 3PAR StoreServ 7000 Storage system.
•
If you have already connected to the HP 3PAR storage system one or more times, select
the storage system from the list.
3. Enter the username and password.
To access your new HP 3PAR StoreServ 7000 Storage system for the first time, enter username
3paradm and the new password for 3paradm you created in the Storage System Setup wizard.
CAUTION: You must configure host s and storage for one HP 3PAR storage system at a time.
Configuring multiple storage systems can lead to inconsistencies and operating errors.
19