HP Command View EVA Software - Manual (Page 88)

Table 6 HP P6000 Performance Data Collector commands (continued)
Description Command
Performs the following series of tasks: fn [short]
•
Scans the hosts on the friendly name host list.
• Queries HP P6000 Command View on each host for known friendly name
information.
•
Adds the friendly name information found to the fnames.conf file.
Displays help for HP P6000 Performance Data Collector. h , help, or evaperf without
a modifier
Displays host connection information. The Port column in the output does not display
data for the HSV200 series of controllers onward; therefore, a hyphen (—) appears in
the Port column. hc
Displays the performance data/state changes for objects of a specified type within the
specified time range. hist
Displays host port statistics. The field Port WWN is included as part of the hps command
output in HP P6000 Performance Data Collector. This field provides the WWN of the
host port. hps
Displays a list of storage systems that are visible to the host. ls
Displays LUNs visible to the host. luns
Displays output for the ls, as, cs, vd, vdg, hc, ps, hps, pd, pdg, drg, drt, xcopy,
wsame
, and unmap commands and saves the output for each command in a separate
file. The -od modifier is required.
mof
Displays a summary of the storage system status by running the following commands
together: ls, as, cs, vd, vdg, hc, ps, hps, pd, pdg, drg, drt, xcopy, wsame, and
unmap
.
nall
Displays physical disk data. pd
Displays statistics for physical disk activity. pda
Displays the total physical disk data by disk group. pdg
In Windows Performance Monitor, sets the array filter list. pfa [array]*
Deletes the filter configuration for Windows Performance Monitor. pfd
Displays help for the Windows Performance Monitor filter commands. pfh
Displays the filter configuration for Windows Performance Monitor. pfs
In Windows Performance Monitor, sets the virtual disk filter list. pfvd [vdisk]*
Displays Fibre Channel port status. ps
Resets the error counters reported by the ps command. rc
Configures HP P6000 Performance Data Collector RPC server for remote client. server host port
[username] [-usessl]
Displays HP P6000 Command View login parameters used for state data collection. showcvconfig
Displays the summary of performance data for unmap command for each controller. unmap
Displays virtual disk statistics and DR log disk information. Only virtual disks that have
been presented to a host are displayed. vd
Displays the total virtual disk data by disk group. vdg
Displays virtual transfer size histograms. This command is available on the HSV200
series of controllers onward. vdts
88 Monitoring array performance using HP P6000 Performance Data Collector