HP StoreEasy 3000 Gateway Storage - Manual (Page 31)

Status Item / Description
Green = AMP mode enabled
Amber = Failover
Flashing amber = invalid configuration
Off = AMP modes disabled
3. AMP status
Off = Normal
Amber =Failure
For detailed information on the activation of these LEDs, see “
Systems
Insight Display LED combinations ” on page 31.
All other LEDs
Systems Insight Display LED combinations
When the internal health LED on the front panel illuminates either amber or red, the server is
experiencing a health event. Combinations of illuminated system LEDs and the internal health LED
indicate system status.
Table 9 Systems Insight Display LEDs and internal health LED combinations
Status Internal health LED
color Systems Insight
Display LED and
color
One or more of the following conditions may exist:
• Processor in socket X has failed.
• Processor X is not installed in the socket.
• Processor X is unsupported.
• ROM detects a failed processor during POST.
Red
Processor failure,
socket X (amber)
Processor in socket X is in a pre-failure condition. Amber
One or more of the following conditions may exist:
• PPM in slot X has failed.
• PPM is not installed in slot X, but the corresponding pro-
cessor is installed.
Red
PPM failure, slot X
(amber)
DIMM in slot X has failed. Red
DIMM failure, slot X
(amber)
DIMM in slot X is in a pre-failure condition. Amber
One or more DIMMs has failed. Test each bank of DIMMs by
removing all other DIMMs. Isolate the failed DIMM by replacing
each DIMM in a bank with a known working DIMM.
Red
DIMM failure, all
slots in one bank
(amber)
One or more DIMMs has failed. Test each bank of DIMMs by
removing all other DIMMs. Isolate the failed DIMM by replacing
each DIMM in a bank with a known working DIMM.
Red
DIMM failure, all
slots in all banks
(amber)
Bank X failed over to the online spare memory bank. Amber
Online spare
memory (amber)
X3000 G2 Network Storage System User Guide 31