HP Scanjet Pro 3000 s2 Sheet-feed Scanner - Manual (Page 16)

2 Use the scanner
The following topics describe how to load and scan originals.
Load originals
The following topics describe how to load originals into the document feeder.
Document loading tips
● The maximum capacity of the document feeder is 50 sheets of 75 g/m 2 (20 lb) paper. When
using heavier paper, the maximum capacity is decreased.
TIP: Use the lines on the input tray paper guides to help you to not exceed the document
feeder capacity.
● The maximum card capacity, for card stock up to 15 points, is approximately 9–10 cards.
● Be sure that your documents are within these guidelines:
Width: 74 mm to 215.9 mm (2.9 in to 8.5 in)
Length: 51 mm to 864 mm (2.0 in to 34 in)
Weight: 49 g/m 2 to 120 g/m 2 (13 lb to 32 lb)
● The scanner document feeder can process cards that meet the following specifications:
Minimum size: 51 mm x 74 mm (2.0 in x 2.9 in)
Maximum size: 210 mm x 269 mm (8.3 in x 10.6 in)
Minimum weight: 253 g/m 2 (12 points or 102 lb)
Maximum weight: 326 g/m 2 (15 points or 120 lb)
● Scanning the following types of documents might result in paper jams or damage to the
documents.
Wrinkled or creased documents Curled documents
10 Chapter 2 Use the scanner ENWW