HP Linear Tape File System Software User Manual
Page 14
To verify each step of the process:
1.
Verify that the HP LTFS driver is installed correctly and running.
2.
Verify that the following directories are in the install directory:
• configuration
• logs
• utils
3.
Verify that the TapeAssure LTFS service is running. Use the Sa_TapeAssure utility with the –d
option and verify that the status is Running.
4.
Verify that the tickets are being received by Command View TL (even if the drives are not shown
in the user interface) by checking for the ticket in the Command View TL das_0.log file.
a.
On the server running CommandView TL, open the file C:\Program Files\
Hewlett-Packard\Command View TL\log\das_0.log
in a text editor, such as
Notepad.
b.
Look for an entry showing that the ticket was received.
NOTE:
For a full set of installation checks, see
Installation and configuration
14