Editing an ao configuration, Deleting ao configurations, Starting an ao configuration – HP 3PAR Operating System Software User Manual
Page 175: Viewing an ao configuration, The ao configurations tab

Editing an AO Configuration
To edit an existing AO configuration:
1.
Access the AO Configurations tab in the Management Window.
2.
Right-click on the name of the AO configuration you wish to edit. then select Edit from the
menu list.
The Edit AO Configuration dialog box appears.
3.
You may change the Name, Mode, and/or up to two CPGs.
NOTE:
Data moves resulting from your configuration changes can impact performance.
4.
Click OK to accept the changes.
Deleting AO Configurations
To delete an AO configuration:
1.
Access the AO Configurations tab in the Management Window.
2.
Right-click on the name of the AO configuration you wish to delete. then select Remove from
the menu list. All schedules associated with this AO configuration will also be removed.
The Remove AO Configuration(s) confirmation dialog will appear.
3.
Click OK.
Starting an AO Configuration
To start an AO configuration, follow the instructions in
, select Run Now,
then enter the Measurement Duration.
Viewing an AO Configuration
To view an AO Configuration:
1.
Click on the Provisioning Manager in the Manager pane.
2.
In the Management Tree, expand the name of the storage system containing the AO
configuration you wish to view.
3.
In the Management Tree, click on AO configurations.
4.
The AO configurations window appears with the following tabs:
“The AO Configurations Tab” (page 175)
The AO Configurations Tab
The AO Configurations tab is divided into a list pane and a detail pane.
Managing AO Configuration
175