HP Lights-Out 100 Remote Management - Manual (Page 7)

Installation 7
2. Locate the 30-pin RILOE II connector on the system board.
3. Remove the remote management card from its protective packaging.
4. Install the remote management card.
Post-installation procedures
1. Be sure all components are installed according to the "Pre-installation procedures (on page 6 )."
2. Be sure you have not left any loose tools or parts inside the server.
3. Reinstall any expansion boards, peripherals, board covers, and system cables previously removed.
4. Reinstall the system covers.
5. Connect all external cables and the AC power cord to the system.
6. Press the power button on the front panel to turn on the server.