Configuring tray 2 or tray 3 for custom paper – HP Color LaserJet 3800 Printer series User Manual
Page 69

There are three steps to set up custom paper. When all are completed, the display returns to the PAPER
HANDLING menu. After a custom size is set for a tray, the printer retains the setting until you change
it in the control panel.
x
y
y
1
2
1
X dimension
2
Y dimension
Unit of measure
1.
Press
to highlight UNIT OF MEASURE, and then press .
2.
Press
or
to highlight the correct measurement, and then press .
X dimension
The X dimension is the width of the page as it feeds into the printer.
1.
Press
to highlight X DIMENSION, and then press .
2.
Press
or
to highlight the correct value, and then press .
Y dimension
The Y dimension is the length of the page as it feeds into the printer.
1.
Press
to highlight Y DIMENSION, and then press .
2.
Press
or
to highlight the correct value, and then press .
Configuring tray 2 or tray 3 for custom paper
The printer automatically detects many sizes of paper, but you can also configure trays for custom paper
sizes. You must specify the following parameters:
●
Unit of measure (millimeters or inches)
●
X dimension (the width of the page as it feeds into the printer)
●
Y dimension (the length of the page as it feeds into the printer)
ENWW
Configuring trays
55