Enww control-panel messages 127 – HP Color LaserJet 3800 Printer series User Manual
Page 141

Control panel message
Description
Recommended action
for more
information.
INFLATE FAILURE
An error has occurred during a firmware
upgrade.
1.
Reinstall the firmware.
2.
If the problem persists, contact
HP Support.
Initializing
This message appears when the printer is
turned on and begins initialization.
No action necessary.
Initializing permanent storage
This message appears when the printer is
turned on to show that permanent storage is
being initialized.
No action necessary.
INSERT OR CLOSE TRAY XX
A tray is open and the printer is trying to print
from another tray.
Close the tray indicated so that printing can
continue.
INSTALL
alternates with
For help press
The cartridge is either not installed or not
correctly installed in the printer.
Press for help.
or
for more
information.
INSTALL FUSER
For help press
The fuser is either not installed or not
correctly installed in the printer.
Press for help.
or
Contact HP Customer Support or your
authorized HP service provider.
INSTALL SUPPLIES
For status press
Two or more cartridges are missing.
Install the missing cartridges.
Press
and then press for help.
or
for more
information.
INSUFFICIENT MEMORY TO LOAD
FONTS/DATA
This message alternates with the name of the
storage device. The storage device does not
have enough memory to load the fonts or
other data.
Press
to continue printing without using
the data.
To solve the problem, increase the amount of
memory for the device. Press for more
information.
LOAD TRAY X
alternates with
For help press
Tray X is either empty or configured for a type
and size other than that specified in the job.
No other tray is available.
Press for help.
or
for more information.
LOAD TRAY X
alternates with
To use another tray press
Tray X is either empty or configured for a type
and size other than that specified in the job.
Press for help.
or
Press
to print from another tray. See
for more information.
Loading program X
alternates with
Programs and fonts can be stored on the
printer file system and are loaded into RAM
when the printer is turned on. The number X
No action necessary.
ENWW
Control-panel messages
127