HP Color LaserJet 3800 Printer series - Manual (Page 25)

Opening the printer drivers
Operating System To change the settings for all
print jobs until the software
program is closed To change the default settings
for all print jobs To change the product
configuration settings
Windows 98 and Me 1. On the File menu in the
software program, click
Print.
2. Select the driver, and then
click Properties.
The steps can vary; this
procedure is most common.
1. Click Start, click Settings,
and then click Printers.
2. Right-click the driver icon,
and then select
Properties.
1. Click Start, click Settings,
and then click Printers.
2. Right-click the driver icon,
and then select
Properties.
3. Click the Configure tab.
Windows 2000, XP,
and Server 2003 1. On the File menu in the
software program, click
Print.
2. Select the driver, and then
click Properties or
Preferences.
The steps can vary; this
procedure is most common.
1. Click Start, click Settings,
and then click Printers or
Printers and Faxes.
2. Right-click the driver icon,
and then select Printing
Preferences.
1. Click Start, click Settings,
and then click Printers or
Printers and Faxes.
2. Right-click the driver icon,
and then select
Properties.
3. Click the Device Settings
tab.
Mac OS 9.1 or later
(HP Color LaserJet
3000 and 3800
Series printers only)
1. On the File menu, click
Print.
2. Change the settings that
you want on the various
pop-up menus.
1. On the File menu, click
Print.
2. As you change settings on
the pop-up menu, click
Save Settings.
1. Click the desktop printer
icon.
2. From the Printing menu,
click Change Setup.
Mac OS X V10.2 and
V10.3 1. On the File menu, click
Print.
2. Change the settings that
you want on the various
pop-up menus.
1. On the File menu, click
Print.
2. Change the settings that
you want on the various
pop-up menus.
3. On the Presets pop-up
menu, click Save as and
type a name for the preset.
These settings are saved in the
Presets menu. To use the new
settings, you must select the
saved preset option every time
you open a program and print.
1. In the Finder, on the Go
menu, click Applications.
2. Open Utilities, and then
open Print Center (Mac OS
X V10.2) or Printer Setup
Utility (Mac OS X V10.3).
3. Click on the print queue.
4. On the Printers menu,
click Show Info.
5. Click the Installable
Options menu.
NOTE Configuration
settings might not be
available in Classic
mode.
Software for networks
For a summary of available HP network installation and configuration software solutions, see the HP
Jetdirect Embedded Print Server Administrator’s Guide. You can find this guide on the printer CD.
ENWW Printer software 11