HP Color LaserJet 3800 Printer series - Manual (Page 44)

Menu item Values Description
OPTIMUM SPEED/ENERGY
USAGE
(HP Color LaserJet 3000 and
3800 Series printers only)
FASTER FIRST PAGE
SAVE ENERGY
Affects print speed by defining whether the fuser cools
between jobs. When FASTER FIRST PAGE is selected, the
fuser does not cool, and printing is faster. When SAVE
ENERGY is selected, the fuser cools between jobs. The
default is FASTER FIRST PAGE.
DISPLAY BRIGHTNESS 1–10 Adjusts the brightness of the printer control panel. The
default is 5. See
Display Brightness feature .
PERSONALITY
(HP Color LaserJet 3000 and
3800 Series printers only)
AUTO
PCL
PDF
PS
Sets the default personality to automatic switching, PCL,
PDF, or PostScript emulation. The default is AUTO.
See Personality feature for more information.
CLEARABLE WARNINGS
(HP Color LaserJet 3000 and
3800 Series printers only)
JOB
ON
Sets the amount of time that a clearable warning appears on
the printer control panel. The default is JOB, which appears
until the end of the job that generated the warning. ON
appears until the
is pressed.
See Clearable Warnings feature for more information.
AUTO CONTINUE OFF
ON
Determines printer behavior when the system generates an
auto-continuable error. The default is ON.
ON automatically continues printing after 10 seconds.
OFF pauses printing. Press to continue printing.
See Auto Continue feature for more information.
REPLACE SUPPLIES STOP AT LOW
STOP AT OUT
OVERRIDE AT OUT
Sets low or out supplies operating options. The default is
STOP AT OUT.
STOP AT LOW pauses printing when a low supply is
reported. Press
to continue printing.
OVERRIDE AT OUT allows the printer to continue printing
even after some supplies have run out.
See Replace Supplies feature for more information.
ORDER AT 0–100 The user can set the percent remaining at which the ORDER
AT message is displayed. The default percentage is 15.
COLOR SUPPLY OUT STOP
AUTOCONTINUE BLACK
Sets the printer behavior when a color print cartridge is
empty. When the printer is set to AUTOCONTINUE BLACK,
the printer continues printing using black toner only. The
default is STOP.
JAM RECOVERY AUTO
OFF
ON
Sets whether the printer will attempt to reprint pages after a
jam. The default is AUTO.
See Jam Recovery feature for more information.
30 Chapter 2 Control panel ENWW