Operating system installation, Signed drivers for windows 2000 – HP ProLiant ML150 Server User Manual
Page 10
Operating System Installation
To complete the installation of the factory-installed operating system and configure
the server:
1. Power up the server, if not already powered up.
2. Press the appropriate key to continue at the HP Welcome screen. The server
software license screen appears.
3. Read all software license agreements provided with the server.
4. Press the appropriate key to accept the license agreements if you agree with all
the terms and conditions of the license agreements to continue the installation.
5. Carefully follow the online prompts, making keyboard or mouse entries only
when prompted by the system. Several status screens describing the process that
is occurring appear during the software installation.
CAUTION: The server requires a reboot at the end of the installation. Do not power
down the server at any time during the installation process. Any power interruption
during the installation process could prevent proper completion of the installation and
prevent the operating system from restarting.
NOTE: You can view and print the End-User License Agreement (EULA) after the
installation is complete by clicking Start>Programs>Pre-Install Features>End User
License Agreement.
Signed Drivers for Windows 2000
During the installation of the operating system, caution messages might appear
concerning unsigned software drivers. The caution message states “
Digital
Signature is Not Found
” as drivers are about to be installed. When prompted,
click Yes to accept the drivers and continue the installation. If you are prompted to
reboot the server, click No. After the operating system installation is complete,
10
HP Factory-Installed Operating System Software for Microsoft Windows 2000 Server User Guide