HP LaserJet 4100 Multifunction Printer series User Manual
Page 91
Understanding control panel messages 89
TONER LOW
The message first appears when about 15 percent of the toner remains in the toner cartridge (at
5 percent coverage, about 1,500 pages remain for the 10,000-page cartridge and about 900 pages
remain for the 6,000-page cartridge). Depending on how the product has been configured, it either
continues to print or stops.You might want to ensure that you have a replacement toner cartridge
available.
If the product has stopped, you can resume printing by pressing
S
TART
for each job.
See
“Toner low and toner out conditions” on page 71
for information about configuring the product’s
response to toner messages.
TONER OUT
The toner cartridge is now empty. Depending on how the product has been configured, it either
continues to print or stops.
If the product has stopped, you can resume printing by pressing
S
TART
for each job. Replace the
toner cartridge.
See
“Toner low and toner out conditions” on page 71
for details on how to configure the product’s
response to toner messages.
TRAY [X] EMPTY
[TYPE] [SIZE]
Load media in the empty tray (
x
) to clear the message. If you do not load the specified tray, the
product continues printing from the next tray with the same media size and type, and the message
continues to appear.
TRAY [X] OPEN
The specified tray is open. Close the tray to continue the job.
TRAY 1 LOAD
[TYPE] [SIZE]
This message occurs for the following reasons:
●
Tray 1 was requested and the tray is empty.
●
The requested media size is not found.
●
If the correct media size is loaded, the tray or the control panel is not set correctly.
To adjust Tray 1 to accommodate special media, see
. See also
“Loading Tray 2 and optional Trays 3 and 4” on page 24
Load the requested media into Tray 1, or press
S
TART
to override the message and print on a
loaded media size.
If printing does not continue, press
S
TART
.
If you are trying to print letter- or A4-size media and this message appears, make sure the
default media size is set correctly from the Printing menu in the control panel and also in the
software program.
Press
S
TART
to print from the next available tray.
Press the down navigation button to scroll through the available types and sizes.
Press
to accept the alternative type or size.
Note
If custom size is being used, another line appears in the message giving the x and y dimensions
of the media.
TRAY [X] LOAD
[TYPE] [SIZE]
where
x
is Tray 2, 3,
or 4
This message occurs for the following reasons:
●
Tray 2, 3, or 4 was requested, but the tray is empty.
●
Tray 2, 3, or 4 was requested, but the adjustments are not set for the requested media type
or size.
Make sure that all paper guide adjustments have been made (see explanation in
and optional Trays 3 and 4” on page 24
). Also make sure that the type has been set at the
control panel.
Load the requested media into the indicated tray, or press
to override the message and print
on a loaded media size.
If printing does not continue, press
S
TART
.
If you are trying to print letter- or A4-size media and this message appears, make sure the
default media size is set correctly in the Printing menu at the control panel and also in the
software program.
Press
S
TART
to print from the next available tray.
Press the down navigation arrow to scroll through the available media types and sizes.
Press
to accept the alternative type or size.
Control panel messages (continued)
Message
Explanation or recommended action