Autosend – HP LaserJet 4200 Printer series User Manual
Page 31
ENWW
AutoSend 25
AutoSend
Use the AutoSend page to send device configuration and supplies usage information periodically
to Hewlett-Packard. This feature enables you to have a relationship with Hewlett-Packard that is
designed to provide you with services that include but are not limited to proactive cartridge
replacement, pay-per-page contracts, support agreements, and usage tracking. The following
illustration, table, and procedure describe how to use this page.
Note
The AutoSend page is only available for the HP LaserJet 2300 series printer.
To enable the AutoSend feature
1
Enable the outgoing and incoming e-mail by following the instructions that are listed in this
chapter. (For more information, see
2
Select the Enable AutoSend check box.
3
Click an option to specify the interval at which you want the product to send the product
configuration and supplies usage information to HP, and then type the number of days,
weeks, months, or pages printed.
4
Click Apply.
1
2
3
4
Callout Area on the page
Information or capability provided by the area
EWS tabs and menus
For more information, see
“Navigating through the HP Embedded
Enable AutoSend
Select this check box to enable the AutoSend feature.
Send every [interval]
Select the interval at which you want the product to send the
product configuration and supplies usage information to HP.
Hewlett-Packard Online
Privacy Statement
View more information about how HP treats the information that
is sent by AutoSend.
1
2
3
4