HP Integrity NonStop J-Series - Manual (Page 259)

Error Messages
HP AutoSYNC User’s Guide—522580-018
D-7
Informational messages
142
Cause. Configuration could not be accessed from the MapDB tables.
Effect. Configuration information is not available to the monitor; requested services
will not be performed.
Recovery. Correct the table access problem and issue the MONITOR REFRESH
NOW command.
143
Cause. Configuration information in the MapDB tables is inconsistent.
Effect. The configuration information is not available on request to the monitor.
Recovery. Correct the configuration information and issue the MONITOR REFRESH
NOW command.
200
Cause. An ASYSYNC process detected an error accessing a SYNC user logfile.
Effect. The error number and the nature of the problem is described in the message.
Recovery. Check the logfile for the SYNC user and correct the access problem.
201
Cause. An ASYSYNC process logged an error to a SYNC user logfile.
Effect. An ASYSYNC process has failed and a synchronization may not be performed.
Recovery. Check the log of the SYNC user for further information.
204
Cause. An ASYSYNC process has initialized or updated its file sets.
MAPDB access error
MAPDB inconsistent
ASYSYNC log access error
ASYSYNC logged error
Fileset update