HP Integrity NonStop J-Series - Manual (Page 244)

Problem Resolution
HP AutoSYNC User’s Guide—522580-018
B-10
Submitting Problems
The following example traces a synchronization attempt where no files require
synchronization.
Submitting Problems
To report a problem please collect supporting data and contact HP Support.
Autosync 3? info syncf 1,log last 1;
Autosync User: 100,1 (SYSMAN.USER1)
ID Source fileset Destination fileset Batch Intvl
---- ------------------------- --------------------------------- ----- ---
1 $DATA2.STUFF.* \SYSB.$DATA2.STUFF.* "JC" 1
Log Starting Time: 2001-02-09 16:39:11.373
s-PROCESS_CREATE_(\SYSB.$DATA2.JCC153.ASYSYNC,\SYSB.$Y2769:24726817)
s-FILE_OPEN_(\SYSB.$Y2769:24726817.#INITCMD:3/NW)
s-WRITEX(\SYSB.$Y2769:24726817.#INITCMD:3) Nowait
d-REPLYX(0,0)
s-AWAITIOX(\SYSB.$Y2769:24726817.#INITCMD:3)
s-FILE_CLOSE_(\SYSB.$Y2769:24726817.#INITCMD:3) Nowait
d-READUPDATEX($RECEIVE:0) Nowait
d-AWAITIOX($RECEIVE:0,4,0) System Message(CLOSE), Sender: \SYSA.$Y9232
(8,14
d-REPLYX(0,0)
d-READUPDATEX($RECEIVE:0) Nowait
d-AWAITIOX($RECEIVE:0,99,0) System Message(OPEN, Qual: #SYNC), Sender:
\SYSA
d-REPLYX(4,0)
s-FILE_OPEN_(\SYSB.$Y2769:24726817.#SYNCCMD:3/NW)
s-WRITEREADX(\SYSB.$Y2769:24726817.#SYNC:3,270) Nowait
d-READUPDATEX($RECEIVE:0) Nowait
d-AWAITIOX($RECEIVE:0,340,0) Sender: \SYSA.$Y9232 (8,149)
Driver(Fileset)
s-AWAITIOX(\SYSB.$Y2769:24726817.#SYNC:3,72) Remote(Fileset)
d-REPLYX(72,0)
s-WRITEREADX(\SYSB.$Y2769:24726817.#SYNC:3,0) Nowait
d-READUPDATEX($RECEIVE:0) Nowait
d-AWAITIOX($RECEIVE:0,70,0) Sender: \SYSA.$Y9232 (8,149) Driver(Stop)
d-READUPDATEX($RECEIVE:0) Nowait
s-AWAITIOX(\SYSB.$Y2769:24726817.#SYNC:3,70) Remote(STOP)
d-REPLYX(70,0)
s-FILE_CLOSE_(\SYSB.$Y2769:24726817.#SYNC:3) Nowait
d-AWAITIOX($RECEIVE:0,4,0) System Message(CLOSE), Sender: \SYSA.$Y9232
(8,14
d-REPLYX(0,0)
d-READUPDATEX($RECEIVE:0) Nowait
s-AWAITIOX(:-1) Error 40
d-AWAITIOX(:-1) Error 40
d-PROCESS_STOP_($Y2769) Error 1000
d-*** Stop Trace ***
d-Program: \SYSB.$SYSTEM.AUOSYNC.ASYSYNC($Y2769), Term $0
s-AWAITIOX($RECEIVE:0,210,0) System Message(Process ,*Error*
stopped,CC:1000)
s-REPLYX(0,0)
s-READUPDATEX($RECEIVE:0) Nowait
s No moves required to synchronize $DATA2.STUFF.* to
\SYSB.$DATA2.STUFF.*.
s-AWAITIOX(:-1) Error 40
s-AWAITIOX(:-1) Error 40
s-AWAITIOX(:-1) Error 40
s-AWAITIOX(:-1) Error 40