HP P2000 G3 MSA Array Systems - Manual (Page 27)

HP P2000 G3 iSCSI MSA System User Guide 27
Table 4 SAS expansion cable requirements: expansion module to expansion module connection
1 One 0.5m cable required per I/O module to I/O module connection.
2 Cables required, if not included, must be separately purchased.
3 One 0.6m cable required per I/O module to I/O connection.
NOTE: Additional cabling notes:
When adding more than two drive enclosures, you may need to purchase additional 1m or 2m cables:
• Spanning 3, 4, or 5 drive enclosures requires 1m cables.
• Spanning 6 or 7 drive enclosures requires 2m cables.
Product model-to-model storage component attachment SAS expansion (In/Out) cable data
Expansion module Expansion module Type Length Connectors
P2000 6Gb drive enclosure P2000 6Gb drive enclosure mini-SAS to mini-SAS 1 0.5m 6Gbps
D2700 6Gb drive enclosure mini-SAS to mini-SAS 1 0.5m 6Gbps
MSA70 3Gb drive enclosure mini-SAS to mini-SAS 1,2 0.5m 6Gbps
3Gbps
MSA2000 3Gb drive enclosure mini-SAS to SAS 1,2 0.6m 6Gbps
3Gbps
D2700 6Gb drive enclosure D2700 6Gb drive enclosure mini-SAS to mini-SAS 1 0.5m 6Gbps
P2000 6Gb drive enclosure mini-SAS to mini-SAS 1,2 0.5m 6Gbps
MSA2000 3Gb drive enclosure mini-SAS to SAS 1,2 0.5m 6Gbps
3Gbps
MSA70 3Gb drive enclosure mini-SAS to mini-SAS 1,2 0.5m 6Gbps
3Gbps
MSA70 3Gb drive enclosure MSA70 3Gb drive enclosure mini-SAS to mini-SAS 1 0.5m 3Gbps
P2000 6Gb drive enclosure mini-SAS to mini-SAS 1 0.5m 3Gbps,
6Gbps
D2700 6Gb drive enclosure mini-SAS to mini-SAS 1 0.5m 3Gbps,
6Gbps
MSA2000 3Gb drive enclosure mini-SAS to SAS 1 0.6m 3Gbps
MSA2000 3Gb drive
enclosure
MSA2000 3Gb drive enclosure SAS to SAS 3 0.6m 3Gbps