D2700 6gb drive enclosure, P2000 6gb 3.5" 12-drive enclosure, Msa70 3gb drive enclosure – HP P2000 G3 MSA Array Systems User Manual
Page 20
20
Components
IMPORTANT:
See
Connecting to the controller CLI port
for information on enabling the controller
enclosure’s USB Type B CLI port.
Drive enclosures attach to the controller enclosure for the purpose of expanding storage capacity. Drive
enclosures supported by the P2000 G3 MSA System controllers are described in the following sections.
The 3Gb drive enclosures supported by the newer controller enclosures are listed for customers upgrading
existing legacy systems.
NOTE:
For optimal performance, 6Gb P2000 G3 MSA System controller enclosures should be cabled to
6Gb P2000 G3 MSA System drive enclosures when expanding storage capacity.
D2700 6Gb drive enclosure
P2000 G3 MSA System controllers support D2700 6Gb drive enclosures. For information about
P2000 G3 MSA System products, visit
. Select Related products, select
your drive enclosure, select Support > HP Support & Drivers from the right side of the page, select your
product name, and select Manuals.
P2000 6Gb 3.5" 12-drive enclosure
MSA70 3Gb drive enclosure
P2000 G3 MSA System controllers can also be attached to an MSA70 3Gb drive enclosure that is running
firmware version 2.18 or later. For information about the MSA70 3Gb drive enclosure, see the HP
StorageWorks 70 Modular Smart Array Enclosure user guide located on the MSA2000 Software
Support/Documentation CD shipped with your product, or accessible from your HP MSA products page at
.
1
Power supplies
2
I/O module A
3
Disabled button (used by engineering only)
4
Service port (used by service personnel only)
5
SAS In port
6
SAS Out port
7
I/O module B
0
0
IN
OUT
0
0
IN
OUT
1
3 4
6
7
1
5
2