HP Designjet T620 Printer series - Manual (Page 161)

Functional specifications
Table 18-1 HP 72 ink supplies
Printheads Two inks in each printhead: gray and photo black, matte black and yellow, and
magenta and cyan
Ink cartridges Cartridges containing 69 ml of ink: gray, photo black, yellow, magenta and cyan
Cartridges containing 130 ml of ink: gray, photo black, matte black, yellow, magenta
and cyan
Table 18-2 Paper sizes
Minimum Maximum
Roll width 11 inches (279 mm) 24-inch printer: 24 inches (609 mm)
Roll length 300 feet (91.4 m)
Sheet width 8.3 inches (210 mm) 24-inch printer: 24 inches (609 mm)
Sheet length 11 inches (279 mm) 24-inch printer: 36 inches (915 mm)
Table 18-3 Printing resolutions
Print quality Maximum
detail Rendering resolution (ppi) Printing resolution (dpi)
Best On 1200 Ч 1200 2400 Ч 1200 on glossy paper*,
1200 × 1200 on other papers
Off 600 Ч 600 600 Ч 600
Normal On or Off 600 Ч 600 600 Ч 600
Fast On or Off 600 Ч 600 600 Ч 600
Economode Off 300 Ч 300 300 Ч 300
* For a list of supported glossy papers, see Order paper on page 106 .
Table 18-4 Margins
Top right and left margins 5 mm = 0.2 inches
Bottom margin (trailing edge) 5 mm = 0.2 inches (roll)
17 mm = 0.67 inches (sheet)
Table 18-5 Mechanical accuracy
±0.1% of the specified vector length or ±0.2mm (whichever is greater) at 23°C (73°F), 50-60% relative humidity, on E/A0 printing
material in Best or Normal mode with HP Matte Film roll feed.
158 Chapter 18 Printer specifications ENWW
Spec
if
ica
tions