HP Netserver L Server series - Manual (Page 60)

Appendix A Control Panel Description
54
Table A-1. Control Panel Description
Control Panel Item Description
Power Button Turns the NetServer on and off. Note that when
the NetServer is turned off, the power to the
internal circuitry and mass storage devices is
disabled; however, AC power is still applied to
the power supply. Always disconnect the
power cord before removing the cover.
Power-On Light One Power Supply: Turns green when the
NetServer is on.
Two Power Supplies: Turns green when both
power supplies are on. Flashing light when one
power supply or one line cord has a fault.
Reset Button Restarts the NetServer. You can press this
button if the NetServer “hangs” or “locks up”—
it has the same effect as turning the NetServer
off and on. Save any work before pressing the
Reset button. Any information not saved is lost
when the NetServer shuts down.
Hard Disk Activity Light 1 Yellow indicates activity on the Embedded
SCSI A bus or IDE bus.
Hard Disk Activity Light 2 Yellow indicates activity on the Embedded
SCSI B bus.
Keyboard Lock Button Prevents unauthorized use of the keyboard.
Press the keyboard lock button to lock the
keyboard. Enter the password to unlock the
keyboard. For more information, see
“Configuring System Security” in Information
Assistant.
Keyboard Lock Light Turns yellow when the keyboard is locked.