HP Netserver L Server series - Manual (Page 28)

Chapter 4 Installing UPS Software
22
UPS Installation for Novell NetWare
NOTE Refer to the README file located in the \pwa\netware\disk1
directory on the HP NetServer Navigator CD-ROM for any
updates to the installation procedure.
If you do not have a client with Windows to manage the HP
PowerWise UPS, refer to the README file located in the
\pwa\netware\dos directory on the HP NetServer Navigator
CD-ROM for the installation procedure.
Before installing the software, make sure that:
•
Your HP PowerWise UPS is plugged in, turned on, and connected to the
server via the serial cable. (See the instructions in the HP NetServer LH
Pro Road Map.)
•
Novell NetWare is running on your HP NetServer.
•
You have unloaded any earlier versions of HP PowerWise Assistant, and
removed it from the AUTOEXEC.NCF file. Refer to the UPS README
file for details.
If you are using HP OpenView for Windows to manage your HP PowerWise UPS,
make sure that:
•
HP OpenView for Windows is installed on your central management
console
•
SNMP services are installed and properly set up
•
(Optional) HP NetServer Assistant is installed on your server and central
management console, if you are using it to manage the server