HP Insight Diagnostics Software - Manual (Page 29)

Error Log tab
The Error Log tab displays the following diagnostic information for failed devices:
• The device and test that failed
• A description of and details about the error
• The recommended repair action for the failed hardware issue
• The failed count, the number of times the test has failed
To remove the Error Log entries, click Clear Error Log.
To save the Error Log to an HTML file onto a storage device such as a USB disk or diskette, click Save.
To find detailed information about specific error codes, see “ Error codes ” on page 31.
Figure 11 Error Log
.
Integrated Management Log tab
The Integrated Management Log (IML) tab contains system errors discovered during POST and by the
System Management driver during normal operations. IML entries are dated and have severity levels
and error counts that can be used to help isolate a problem. The Integrated Management Log on the
Log tab displays the current entries in the IML.
Each IML entry displays the following information about a failed device
• One of the following severity levels:
• Information indiciates general information about a system event
• Repaired indicates this entry has been repaired
• Caution indicates a non-fatal error condition has occurred
HP Insight Diagnostics user guide 29