HP Insight Diagnostics Software - Manual (Page 18)

2. Select the subject to view from the Categories list:
• All displays all information about the system and subsystems.
• Overview displays general information about the system.
• Architecture displays the type of bus the system uses, the BIOS, and PCI-related information.
• Asset Control displays the product name, serial number, asset tag, and processor information
(system identification number).
• Communication displays information about the system parallel (LPT) port, serial (COM) port,
USB, and network interface controller.
• Graphics displays information about the graphics subsystem, including the graphics card,
graphics mode, ROM, and video memory.
• Input Devices displays information about the type of keyboard, mouse, and other input devices
connected to the computer.
• Internal Conditions (if supported on system) displays information about the health of the
computer, including the fan, temperature, power supply, and health LED information.
• Memory displays detailed information about system memory.
• Remote Management (if supported on system) displays information about iLO and RILOE II
cards.
• Miscellaneous displays information obtained from CMOS, BIOS data area, Interrupt Vector
table, TPM, and diagnostics component information.
• Resources displays information about the system resources, real-time clock, and operating
system settings for certain settings, such as I/O and IRQs.
• Operating System displays information on the OS, when run in online mode.
• Storage displays information about the storage controllers and storage media connected to
the system, including hard drives, diskette drives, and optical drives. It also shows logical
volume information for all connected hard drives.
• System displays information about the system ROM, product type, processor type and speed,
and coprocessor.
Using HP Insight Diagnostics 18