HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 23)

Command line 23
Item Description
->set enet-connection MyProfile 1 SpeedType=Custom
Speed=2000
Modifies the Ethernet network connection to set the speed to 2Gb
Item Description
Show enet-connection Display the ethernet connections associated with the server profiles.
Syntax show enet-connection
Parameter
ConnectionID (optional) The ID of an existing Ethernet connection. The ID format is
. can be used to display all profile
Ethernet connections. "*" displays all connections existing in the
domain.
Examples
->show enet-connection
Displays all Ethernet connections existing in the domain
->show enet-connection Profile1:*
Displays Ethernet connections of a profile Profile1
->show enet-connection Profile1:1
Displays a specific Ethernet connection of profile Profile1
enet-vlan
Manage Ethernet VLAN connections.
Supported actions: help, set, show
Item Description
set enet-vlan Modifiy general Ethernet VLAN configuration settings.
Syntax set enet-vlan VLanTagControl=
[SharedServerVLanId=]
[PrefSpeedType=] [PrefSpeed=]
[MaxSpeedType=] [MaxSpeed=]
Properties
VLanTagControl
(optional)
Determines how Ethernet packet VLAN tags are handled by the domain. Valid
values include: "Tunnel" and "Map".
The "tunnel" option results in VLAN tagging to be supported only on networks
with dedicated uplinks. Also, Ethernet ports connected to networks using shared
uplink sets can only transmit and receive untagged frames.
The "map" option results in being able to add more than one network to a
single Ethernet port for the server profiles and also being able to specify VLAN
mapping between server tags and VC networks. Also, Ethernet networks with
dedicated uplinks can only transmit and receive untagged frames.