HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 47)

Command line 47
Item Description
->add profile MyNewProfile2 -NoDefaultEnetConn
-NoDefaultFcConn
Creates a new profile without adding default Ethernet and FC connections
->add profile MyNewProfile SNType=Factory-Default
Creates a new profile and uses the factory assigned serial number
->add profile MyNewProfile SNType=User-Defined
SerialNumber=VCX0113121 UUID=15713c60-fcf2-11dc-
a656-0002a5d5c51b
Creates a new profile and specifies a custom virtual serial number and UUID
Item Description
assign profile
Assign a server profile to a device bay.
Syntax assign profile
Parameters
ProfileName
(required)
The unique name of the server profile to assign
DeviceBay
(required)
The device bay to assign the profile to, in the format:
EnclosureID:DeviceBayNumber
If EnclosureID is not specified, it defaults to the local enclosure.
Example
->assign profile MyProfile1 enc0:1
Assigns a profile to device bay 1 of the primary enclosure
Item Description
remove profile
Remove one or more server profiles from the domain.
Syntax remove profile
Parameter
ProfileName
(required)
Name of an existing profile in the VC domain. "*" removes all the existing
profiles
Examples
->remove profile MyProfile
Removes a server profile by name
->remove profile *
Removes all server profiles
Item Description
set profile
Modify properties of an existing server profile.
Syntax set profile [Name=]
[EFIState=absent]
Parameter
ProfileName
(required)
The current name of the profile to modify
Properties