HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 19)

Command line 19
Item Description
DoubleDense
(Optional)
If the enclosure being imported supports double-dense server blades, then this
property enables the device bay display format to support a display for
double-dense server blades. The default behavior is display for single-dense
server blades in the enclosure.
Examples
->import enclosure UserName=Administrator
Password=fgg7h*1
Imports the local enclosure
->import enclosure UserName=Administrator
Password=fgg7h*1 DoubleDense=true
Imports the local enclosure with a double-dense device bay display format
-> import enclosure 192.168.0.120 UserName=MyOaUser
Password=dgfsfdsjd
Imports a remote enclosure into the domain
Item Description
remove enclosure Remove a remote enclosure that has been imported into the domain. The local
enclosure is not allowed to be removed from the domain using the remove
enclosure command.
Syntax remove enclosure
Parameter
EnclosureID
(Required)
The enclosure ID of the remote enclosure to be removed from the domain,
where "*" removes all the remote enclosures that exist in the domain. The
enclosure IDs can be identified for a particular enclosure by using the show
enclosure command. The local enclosure cannot be removed from the
domain with this command.
Examples
->remove enclosure encl
Removes a remote enclosure
->remove enclosure *
Removes all remote enclosures from the domain
Item Description
show enclosure Display all enclosures in the domain.
Syntax show enclosure [|*]
Parameter
EnclosureID
(optional)
The ID of an enclosure in the domain. If specified, then only details for the
specified enclosure are displayed.
Examples
->show enclosure
Displays a summary listing of all enclosures
->show enclosure *
Displays detailed information for all enclosures
->show enclosure enc0
Displays detailed information for a specific enclosure