HP XP Array Manager Software - Manual (Page 18)

Description Item
Displays the capacity (in cylinders) of the LDEV. Capacity
Displays the range of the VTOC area (CC:HH – CC:HH) and the number of tracks in
the VTOC area. For example, 0:1-0:14(14Trk) indicates the following:
• The range of the VTOC area is from cylinder 0 head 1 to cylinder 0 head 14.
• The number of tracks in the VTOC area is 14.
VTOC
(CC:HH)
VTOC Area Dialog Box
The VTOC Area dialog box (see Figure 4 on page 18) enables the user to change the size of the
volume table of contents (VTOC) for specific LDEVs in the connected storage system. To open the
VTOC Area dialog box, select the desired LDEV(s) in the Volume list, and right-click and select VTOC
in the pop-up menu.
Figure 4 VTOC Area Dialog Box
Table 4 VTOC Area Dialog Box
Description Item
Starting location (CC:HH) of the VTOC. You cannot change the starting location. Start (CC:HH)
End (CC:HH) Indicates the current ending location (CC:HH) of the VTOC, and allows
you to change the ending location as desired. Max indicates the maximum CC:HH
values that can be entered for the ending location.
End (CC:HH)
Saves the requested VTOC change, and closes the VTOC Area dialog box. The
requested change is displayed on the Volume Retention Manager window. To apply
the requested change to the storage system, you must select Apply in the Volume
Retention Manager window.
OK
Closes the VTOC Area dialog box without saving the requested VTOC change. Cancel
Volume Retention Dialog Box
The Volume Retention dialog box (see Figure 5 on page 19) enables the user to export access attributes
to a spreadsheet file for specific LDKCs and CUs in the connected storage system.
To open the Volume Retention dialog box, open the Configuration File Loader window, select Volume
Retention from Select Sheet drop-down list and then click Export.
Using the Volume Retention Manager GUI 18