HP EliteBook 2540p Notebook PC - Manual (Page 78)

Testing an AC adapter
Test the AC adapter if the computer exhibits any of the following symptoms:
● The computer will not turn on when it is connected to the AC adapter and external power.
● The display does not turn on when the computer is connected to the AC adapter and external
power.
● The power lights are off when the computer is connected to the AC adapter and external power.
To test the AC adapter:
1. Remove the battery from the computer.
2. Connect the AC adapter to the computer and to an AC outlet.
3. Turn on the computer.
● If the power lights turn on, the AC adapter is functioning properly.
● If the power lights remain off, the AC adapter is not functioning and should be replaced.
Contact technical support for information on obtaining a replacement AC power adapter. Select
Start > Help and Support > Get assistance.
Shutting down the computer
CAUTION: Unsaved information will be lost when the computer is shut down.
The Shut Down command closes all open programs, including the operating system, and then turns off
the display and computer.
Shut down the computer under any of the following conditions:
● When you need to replace the battery or access components inside the computer
● When you are connecting an external hardware device that does not connect to a USB port
● When the computer will be unused and disconnected from external power for an extended period
To shut down the computer, follow these steps:
NOTE: If the computer is in the Sleep state or in Hibernation, you must first exit Sleep or Hibernation
before shutdown is possible.
1. Save your work and close all open programs.
2. Click Start, and then click the arrow next to the Lock button.
3. Click Shut Down.
66 Chapter 5 Power management